cecotec Conga Flash Connected Titanium - Power Adapter and Accessories; Before Use; Pre-Operation Warnings

41
ENGLISH
Power adapter. Fig. 5
Mixed tank with dierent Velcro strips to x the mop. Fig. 6
Primary and high-eciency lters. Fig. 7
Side brushes (4). Fig. 8
Silicone brush. Fig. 9
Mop. Fig. 10
Autoclean brush. Fig. 11
2. BEFORE USE
- This robot vacuum cleaner includes a package designed to protect it during transport.
Take the robot vacuum cleaner out of the box. Keep the original box and other elements
in a safe place, as this will help you prevent product damage when transporting it in the
future. In case the original packaging is disposed of, make sure all packaging materials
are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the Technical Support Service of Cecotec
immediately.
Warnings
- Remove all objects around the robot vacuum cleaner such as clothing, papers, cables,
curtains or other fragile objects which may block or slow down the operation of the robot
vacuum cleaner. Fig. 12
- If the room to be cleaned is near a balcony or stairs, a physical barrier must be placed in
order to prevent product damage and ensure safe operation. Fig. 13
- Direct exposure to sunlight or great light contrasts may aect the correct operation of
the sensors. If this happens, the robot will stop operating, move it to a new location for it
to start operating again.
3. INSTALLATION
1. Place the charging base against the wall and leave a minimum free space of 2 metres to
the front and 1 metre to each side. Fig. 14
2. Connect the charging base to a power socket. Wind and store the remaining cable in the
lower part of the charging base to prevent accidents. Fig. 15
3. Install both side brushes in their corresponding slots, located on the robot lower part.
Press until they click to make sure they are properly xed. Fig. 16
4. Press the power switch located on the lower part of the robot. Make sure the power
switch is in the on position (I). Fig. 17
05794_Conga Flash Connected Titanium_IM_YV_01220902.indd 4105794_Conga Flash Connected Titanium_IM_YV_01220902.indd 41 24/8/22 8:0224/8/22 8:02