EasyManuals Logo

cecotec Conga Quick&Clean Titanium User Manual

cecotec Conga Quick&Clean Titanium
Go to English
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
42
ENGLISH
pause the cleaning process.
- Press the Start/Pause button on the robot vacuum cleaner or on the remote control to
resume the cleaning process.
Returning to the charging base
Press the back home button on the robot or on the remote control in order to send the robot
to the charging base.
Turning o
Hold down the Start/Pause button on the robot to turn it o.
Warning
The robot vacuum cleaner has a power switch (with positions I and 0) located on the lower
part of the main body. If the robot will not be used for long periods of time, it is recommended
to turn it o using this switch. As a safety measure, if the robot is switched o, it will restore
the factory default settings. To operate the robot, the switch must be in the on position (I).
Cleaning modes
This robot includes dierent modes and functions that can be activated from the remote
control.
Automatic mode. Fig. 20
- Press the Start/Pause button on the robot vacuum cleaner or on the remote control, the
robot will start the automatic cleaning.
- The robot will clean the whole surface, edges, around objects such as tables, chairs etc.,
until the battery is low, then it will return to the charging base.
Scrubbing mode. Fig. 21
- Attach the mop to the mixed tank and ll the tank with water.
- Place the mixed tank on the robot vacuum cleaner and select the scrubbing level with the
remote control: high, medium or low.
- Once you have selected the desired scrubbing level from the remote control, the
robot vacuum cleaner will start the All in One function to vacuum, scrub and sweep
simultaneously thanks to its mixed tank.
Note
- If you wish to mop, do not ll the water tank.
- If the robot has the mixed tank installed with water in it, when it leaves the charging base,
it will turn around itself to soak the mop.
- To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
with water before xing it to the mixed tank. It is also recommended to wash the mop after
05792_Conga Quick&Clean Titanium_IM_YV_01220901.indd 4205792_Conga Quick&Clean Titanium_IM_YV_01220901.indd 42 1/8/22 15:041/8/22 15:04

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the cecotec Conga Quick&Clean Titanium and is the answer not in the manual?

cecotec Conga Quick&Clean Titanium Specifications

General IconGeneral
Brandcecotec
ModelConga Quick&Clean Titanium
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals