EasyManuals Logo

cecotec Conga Quick&Clean Titanium User Manual

cecotec Conga Quick&Clean Titanium
Go to English
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
44
ENGLISH
- Use the left and right direction buttons to set the minutes and hours. Use the upwards and
downwards arrow direction buttons to change the digits while they ash.
- Finally, press the Start/Pause button or the clock setting button. The robot vacuum cleaner
will beep when the time settings have been conrmed.
Cleaning scheduling
- For an easier cleaning, the robot includes a schedule function to set daily schedules
through the remote control. According to the setting, the robot will automatically start
cleaning in the selected days at the desired time.
- The time options on the remote control are: 12:00 a. m.–11:59 p.m. and 12:00 p.m.–11:59 p.m.
- Before setting the hour and the options on the robot vacuum cleaner, make sure it is on.
- Press the schedule button on the remote control. The digits will start ashing. Fig. 28
- Use the direction buttons upwards or downwards to select the day. Once selected, use the
right and left buttons to select the minutes and hours. To modify the minutes or hours, use
the left and right direction buttons to select the minutes and hours. Use the upwards and
downwards arrow direction buttons to change the digits while they ash. Press the Start/
Pause button again to save the settings. Follow the same steps to schedule the days. Fig.
29
- Finally, press the schedule button to exit the scheduling mode. The robot will beep once
indicating the scheduled cleaning settings have been conrmed.
- The user may schedule as many days a week as desired. The display screen will show
when the robot vacuum cleaner is programmed.
Cancelling the scheduled cleaning
Press the schedule button on the remote control, select the day you wish to delete and change
the set time to 00:00 am., this is the time you need to set to cancel the cleaning programme.
Warning
Make sure the remote control is close to the robot when setting the clock or scheduling
cleaning cycles.
5. CLEANING AND MAINTENANCE
High-eciency lter
Fig. 30
The high-eciency lter is designed with bres that help trap dust particles, dust mites,
pollen... It is very important to periodically clean the lter, to avoid these particles from
building up in the lter, causing eciency loss. It is convenient to carry out this maintenance
once a week.
It is recommended to replace the high-eciency lter with a new one without exceeding 160
05792_Conga Quick&Clean Titanium_IM_YV_01220901.indd 4405792_Conga Quick&Clean Titanium_IM_YV_01220901.indd 44 1/8/22 15:041/8/22 15:04

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the cecotec Conga Quick&Clean Titanium and is the answer not in the manual?

cecotec Conga Quick&Clean Titanium Specifications

General IconGeneral
Brandcecotec
ModelConga Quick&Clean Titanium
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals