cecotec CREMMAET COMPACTCCINO - Troubleshooting

CREMMAET COMPACTCCINO BLACK / BLACK ROSE / WHITE ROSE / BLACK SILVER
50
ENGLISH
5. Repeat the process until the resulting liquid is as clear as possible.
6. When nished, repeat the process again using only water in the container until all traces
of detergent have been removed from the inside of the cappuccinatore and the ducts.
7. Reassemble the entire tank and enjoy your frothed coee.
Manual cleaning
1. Remove the cappuccinatore from the appliance. To do so, you will have to press both
release tabs on the sides and pull downwards.
2. You will notice that the cappuccinatore is composed of three parts: a small hard plastic
frame, a steam knob, and a rubber part in which the steam knob is placed. You can
separate the rubber part from the frame by pulling outwards. Do this.
3. Once you have these two parts separated, pull the steam knob outwards to remove it.
4. With the three parts separated and dierentiated, use the metal cleaning accessory to
insert it into as many holes as possible and manually descale the solidied milk residues.
In addition, use detergent and plenty of water to get all three parts clean inside and out.
5. When nished, reassemble the three parts in reverse order of disassembly.
NOTE: also, make sure to clean the tube that connects the milk tank to the cappuccinatore.
There may be solidied milk residues.
5. TROUBLESHOOTING
In the event of a fall or malfunction, unplug the appliance immediately from the mains socket.
If a mechanical failure occurs in the appliance, please contact the ocial Cecotec Technical
Support Service. If the problem persists, contact only authorised technicians, the distributor,
or the dealer.