cecotec Cumbia CREMMAET COMPACT - INSTALLATION AND INITIAL USE; Machine Setup and Placement; Filling Water and Bean Containers; Initial Power Connection and Flush

CREMMAET COMPACT
40
ENGLISH
3. INSTALLATION AND INITIAL USE
1. Remove the coee machine from the box and save the packaging material for future use.
Place the machine on a at and stable surface. Fig. 3
2. Remove and clean the water tank Fill it with water and insert it into the coee machine.
Fig. 4
3. Fill the container with coee beans. Fig. 5
4. Plug in the coee machine.
5. Place a container under the coee spout to collect the hot water dispensed by the coee
machine.
6. Press the power button to switch on the machine and clean the coee spout. Fig. 6
7. Press and hold down the ” ” button for 3 seconds to start cleaning/ushing of
the coee machine. Discard the water dispensed by the coee machine and clean the
container.
8. Press the buttons according to the function you want to activate.
9. Press and hold the power button for 3 seconds to switch o the coee machine.
4. OPERATION
Filling up the water tank. Fig. 4
- Remove and clean the water tank
- Fill it with water and insert it into the coee machine.
NOTE:
Never exceed the maximum capacity of the water tank.
Making an espresso
1. Ajuste la altura de la salida de café y coloque una taza debajo. Fig. 7
2. Press the espresso button “ ”once to brew one small espresso.
3. Select the desired amount of coee.
4. During grinding (the control panel display shows “g”), press the “ ” or “ ” buttons to
adjust the amount of coee powder. During coee preparation (“ml” is displayed on the
right-hand side of the control panel display), press “ ” or ” to adjust the amount of
liquid coee.
5. Press the “ ” button to prepare two cups of coee.
6. Press “ ” to stop coee preparation.
Preparing an Americano
1. Adjust the height of the coee spout and place a cup underneath. Fig. 7
2. Press the Americano button “ ” to prepare an Americano coee.