cecotec Cumbia CREMMAET COMPACT - Automatic Shutdown Configuration; Start-up Settings; Manufacturing Information Access; Decalcification Procedure

CREMMAET COMPACT
42
ENGLISH
3. Automatic shutdown settings.Fig. 10
After conguring the quantity and ow rate settings, press the Settings/Exit button “ ” to
enter the automatic shutdown settings interface. Press “ ” or “ ” to programme the coee
machine to shutdown (0.5 h, 1 h, 2 h... 24 h).
4. Start-up settings.Fig. 11
After conguring the quantity and ow rate settings, press the Settings/Exit button “ ” to
enter the automatic start-up settings interface. This function is for authorised professionals
or after-sales personnel only.
5. Manufacturing information.Fig. 12
After setting the temperature adjustment, press the Settings/Exit button “ ” 4 times to
check both the manufacturing information and the date and batch number.
6. Decalcication. Fig. 13
A. Pour the descaler into a container with clean water and follow the manufacturer’s
instructions.
B. Take out the water tank, pour the descaling product into the tank and add clean water
until the tank is completely full, never exceed the maximum.
C. Place a container under the coee spout.
D. In the standby interface, press and hold the Settings/Exit button “ ” and wait for 2
seconds. Then press the Settings/Exit button “ ” again four times and the descaling
indicator “ “ will light up on the display.
E. Press the Conrm button “ ” to start descaling.
F. Once emptied, remove the water tank and add fresh water until the coee machine
completes the cycle. This process may take a few minutes. When the container is full,
empty it.
G. When descaling is complete, be sure to carry out several Cleaning/Rinse cycles as
indicated in the “Cleaning/Rinse” section.
H. When the coee machine is free of descaling agent after the necessary “Clean/Rinse”
cycles, it is ready for normal operation.
7. Adjusting the grinding level. Fig. 14
- When you need to adjust the grind level of the coee beans, turn the grind level knob when
the grinder is in operation, otherwise the grinder may be damaged.
- Adjust the grind level according to the degree of roast of the coee beans you use (medium
roast beans are recommended).
- If the coee comes out too slowly during preparation (the coee powder is too ne), turn
the grind level selector clockwise until a coarser grind is obtained.
- If during preparation the coee comes out too fast and too clear (the coee powder is too
coarse), turn the grind level knob anticlockwise until a ner grind is obtained.