cecotec Mambo 12090 - Language Selection; Mambo Update

50
ENGLISH
- Clean the food processor after each use.
- Wash the buttery whisk and the rest of the accessories with warm soapy water. Rinse
again and dry well.
- Wipe the main body with a clean damp cloth. If food residue remains, dampen the cloth in
warm soapy water before wiping it. Never immerse the main body in water or other liquid.
- In order to maintain the good performance of your appliance, check and clean the
removable bottom part of the jar after each use. Wipe it with a soft damp cloth and dry it
thoroughly before using it again.
- If the appliance is not going to be used for a long time, unplug it from the power supply and
store it in a cool and safe place.
Jar pre-washing advice
For better results, you can do a previous rinse in the jars with the food processor. Both the
ceramic jar and stainless-steel jar can carry out this process. To do so, follow these steps:
- Place the battery on the blades to rinse the stainless-steel jar and the MamboMix spoon
to rinse the ceramic jar.
- Introduce 500 ml of water and 10ml of soap.
- Close the cover and set speed 3, temperature 50 and a maximum time of 3 minutes.
- Empty the jar, there may be some food leftovers, so nish washing the jar by hand (both
the ceramic and stainless-steel har) or introduce the stainless-steel jar in the dishwasher.
Warning
- Do not immerse or expose to water the connectors located on the bottom part of the
ceramic jar.
- The blades and the MamboMix spoon are dishwasher safe.
6. TROUBLESHOOTING
Warning
code
Description Possible cause Solution
E1 warning Locking system The jar or the jar’s cover are
not xed properly.
Re-assemble the jar and
jar cover, make sure all
the parts are assembled
properly and tightly and try
operating it again.
E2 warning Incorrectly
positioned jar
The jar is not in its correct
position or connection of
the temperature sensor at
the jar base is damaged.
Re-assemble the jar and
make sure it is xed properly.