What to do if the motor is blocked in my Cecotec Food Processor?
If the motor of your Cecotec Food Processor is blocked, it's likely due to having too much food inside the jar. To resolve this, remove some of the food or cut the food into smaller pieces. Then, restart the machine.
How to fix a lock system fault on a cecotec Mambo 9590 Food Processor?
If your Cecotec Food Processor displays a lock system fault, the jar or the jar’s lid might not be properly fixed. Try re-assembling the jar and lid, making sure all parts are assembled correctly and tightly. Then, try operating it again.
Why is the motor temperature too high on my Cecotec Food Processor?
If the motor’s temperature of your Cecotec Food Processor is too high, it means that the appliance has been operating with too much food for an extended period. Stop the machine and allow it to cool down completely before restarting.
What to do if I get a temperature sensor error on my cecotec Mambo 9590?
A temperature sensor error on your Cecotec Food Processor usually indicates that the jar is not correctly positioned or the connection of the temperature sensor at the jar base is damaged. Re-assemble the jar, ensuring it is fixed properly.
Why is the temperature too high in my cecotec Mambo 9590 Food Processor?
If the temperature of your Cecotec Food Processor is too high, it could be because there is no or very little food in the jar, and the set temperature is too high for too long. Adding food to the jar should solve this issue.
What causes a scale measurement error on my Cecotec Food Processor?
If you experience a scale measurement error with your Cecotec Food Processor, it means that the maximum measurement value has been exceeded. Remove weight from the scale until it reaches a value below 4.999 g.
How to resolve speed change issues on cecotec Mambo 9590?
If the speed change could not be done successfully on your Cecotec Food Processor, it indicates that the speed change between low level (1-5) and high level (6-10) was blocked. Remove the jar, turn the fixing bracket manually, and place the jar back in place. Then, restart the appliance.
General| Capacity | 3.3 L |
|---|---|
| Material | Stainless steel |
| Speeds | 10 |
| Temperature | 37-120 ºC |
| Included accessories | steamer basket |
To Next Page