What to do if my cecotec Mambo Touch shows A3 warning?
The A3 warning on your Cecotec Food Processor indicates that there is too much food inside the jar. To resolve this, remove some of the food or cut it into smaller pieces before restarting the processor.
What does A1 warning mean on my Cecotec Food Processor and how to fix it?
The A1 warning appears when the jar or its cover are not properly fixed on your Cecotec Food Processor. To fix this, re-assemble the jar and cover, ensuring all parts are assembled tightly and correctly before operating the appliance again.
What does A2 warning mean on my cecotec Mambo Touch Food Processor?
The A2 warning on your Cecotec Food Processor indicates that the jar is not in its correct position or the temperature sensor connection at the jar base is damaged. Re-assemble the jar, making sure it is properly fixed to resolve the issue.
What to do if cecotec Mambo Touch Food Processor shows A5 warning?
The A5 warning on your Cecotec Food Processor means it has been operating with too much food for an extended period. Stop the food processor and allow it to cool down completely before restarting.
What to do if my Cecotec Food Processor jar is stuck?
If the jar of your Cecotec Food Processor is stuck, first restart the processor and wait a few seconds. If it remains stuck, use the manual release lever on the bottom of the main body to release the jug lock.
Why does my cecotec Mambo Touch show A4 warning?
The A4 warning on your Cecotec Food Processor appears when there is very little or no food in the jar and the set temperature is too high for too long. Add food to the jar to resolve this.
What to do if my cecotec Mambo Touch Food Processor shows A7 warning?
The A7 warning indicates that the speed change between low (1-5) and high (6-10) levels was blocked. Remove the jar, turn the fixing bracket manually, place the jar back, and then restart the food processor.
What does A12 warning mean on my cecotec Mambo Touch?
The A12 warning on your Cecotec Food Processor indicates that the maximum measurement value has been exceeded. Remove weight from the scale until it reaches a value below 4.999 g.
Why does my Cecotec Food Processor show A13 warning?
The A13 warning indicates that the scale calibration failed. Repeat the calibration process.
What to do if my cecotec Mambo Touch shows an A1 warning?
The A1 warning on your Cecotec Food Processor typically indicates that the jar or its cover aren't properly secured. To resolve this, disassemble and reassemble the jar and cover, ensuring all parts are fitted correctly and tightly before attempting to operate the appliance again.
General| Heating function | Yes |
|---|---|
| Functions | Blend, chop, knead, grind, steam, cook |
| Material | Stainless steel |
| Color | Black |
| Temperature range | 40°C - 120°C |
To Next Page