cecotec Mambo Touch - Functions and Recommendations

49
ENGLISH
- Spatula
- Instruction manual
- App manual
- Clean the jug and other accessories thoroughly with hot water, detergent, and a
non-abrasive sponge.
- Place the food processor on a at, stable surface. Maintain a minimum distance of 110 mm
between the socket outlet and the wall, surrounding furniture, and your food processor.
- Use a damp cloth to clean the main body and wipe it dry.
Warning
Do not place the food processor on any surface that it is not heat-resistant.
3. OPERATION
Assembling the stainless-steel jug
- Place the jug in the main body, matching the mark on
the jug with the front of the main
body if not correctly placed and try to start cooking. The display will show the warning A2.
Img. 2
- There are capacity marks on the side of the jug. The jug’s maximum usable capacity is 2.3
L when using the food processor at speed 0 and 1.8 L when using the food processor at a
speed between 1 and 10, or with one of the pre-set functions.
Assembling the hinged lid
- Place the lid on the jug matching the markings on the jug and the lid, press the lid around
the jug’s rim and turn the lid clockwise to secure it. Should the lid not be correctly tted
when the speed is not on 0, the A1 warning will appear on the display. Img. 3
- When you open the lid, you can leave it in the folding position; just turn the lid
counterclockwise until it is xed in the support. This way you can open the lid without
removing it completely. Img. 4
Assembling the accessory and xing bracket
- Make sure the accessory bracket’s sealing gasket is properly installed. When installing it
on the jug you must take into account that the bracket must be placed a certain way.
Make sure it ts correctly. Img. 5
- Hold and install the accessory bracket making sure it is correctly tted and turn it
clockwise.
Img. 6
- Install the xing bracket in the bottom part of the jar and turn it clockwise to x the
accessory bracket to the jar. Img. 7
Blade assembly