cecotec Mambo Touch User Manual

58
ENGLISH
A5 warning The motor’s
temperature is
too high.
The food processor has been
operating with too much
food for a lot of time.
Stop operating the food
processor and allow it to
cool down before restarting
it again.
A7 warning The change in
speed could
not be done
successfully.
Speed change between low
level (1-5) and high level
(6-10) was blocked.
Remove the jar, turn the
fixing bracket manually and
place the jar again in place.
Restart the food processor.
A8 warning Wrong NTC
sensor reading.
The temperature sensor is
not working properly.
Contact the Technical
Support Service of Cecotec.
A12 warning Maximum weight
exceeded.
The maximum measurement
value has been exceeded.
Remove weight from the
scale until it reaches a
value below 4.999 g.
A13 warning Calibration error. Scale calibration failed. Repeat the process. If the
problem persists, please
contact Cecotec’s Technical
Support.
Stuck jar. The jug release system does
not work.
Restart the food processor
and wait a few seconds.
If the problem persists,
there is a manual release
lever on the bottom of the
main body. Pull this lever to
release the jug lock.
8. TECHNICAL SPECIFICATIONS
Product reference: 04345/04346
Model: Mambo Touch /Mambo Touch + Habana Jug
1600 W (Motor 600 W Heating power 1000 W) 220-240 V~ 50/60 Hz
Frequency band: 2.400 - 2.4835 GHz
Made in China | Designed in Spain

cecotec Mambo Touch Specifications

General

Heating function	Yes
Functions	Blend, chop, knead, grind, steam, cook
Material	Stainless steel
Color	Black
Temperature range	40°C - 120°C