What to do if my cecotec IronMix Food Processor shows E04 error?
If your Cecotec Food Processor displays an E04 error, it may be due to too many ingredients or too slow speed. You can reduce the amount of ingredients or set a higher speed. Also, you can stop working for a few minutes.
What to do if my cecotec IronMix shows E02 error?
If your Cecotec Food Processor displays an E02 error, turn off the machine. Make sure the jar and the lid are properly placed, and then turn the appliance back on.
What to do if my Cecotec Food Processor shows E03 error?
If your Cecotec Food Processor displays the E03 error, turn off the machine. Then, install the jar or close the lid. You may also need to take off the lid and reinstall it correctly. Finally, reset the machine.
General| Brand | cecotec |
|---|---|
| Model | IronMix |
| Category | Food Processor |
| Language | English |
Signals the appliance's temperature status when it turns on.
Provides quick maximum speed; inactive at or above 60°C.
Used for continuous heating or programming time/temperature without speed.
Adjusts cooking time from 1 second to 60 minutes via rotation.
Sets cooking temperature from 20°C to 120°C via rotation.
Adjusts appliance speed from 1 to 12 via rotation.
Indicates automatic stops with LCD flash and a 5-second beep.
Step-by-step guide for correctly installing the blade assembly.
Instructions for attaching and removing the appliance's main jar.
Steps for using the appliance with speed settings only.
Steps for using the appliance with temperature settings only.
Steps for combining both speed and temperature functions.
Instructions for using the steam cooking function.
Guide on attaching, removing, and using the butterfly whisk.
Lists common error codes (E01-E05), their explanations, and solutions.
Visual guide for installing the airtight seal correctly.
To Next Page