EasyManua.ls Logo

cecotec IronMix - CLEANING; Airtight Seal Installation; TECHNICAL SPECIFICATIONS

cecotec IronMix
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
23
IRONMIX
6. CLEANING
1. Before cleaning the appliance, switch it off and remove the plug from the socket.
2. While cleaning the appliance, do not immerse the jar in water.
3. After the jar cools down, remove the blade from the jar. Clean the inside and outside of the
jar. Keep always the contact pins at the bottom of the jar clean and dry. Wipe the contact pins
only with a wet cloth!
4. Never use pointy or sharp objects to clean the appliance, they may damage functional parts
or affect its safety.
5. Do not wash in the dishwasher.
6. The blade is very sharp! Handle with care!
7. Wash all parts in warm soapy water. Clean them immediately after use. Rinse them with clear
warm water and dry them immediately.
8. We recommend you to lubricate the blade with vegetable oil.
9. Wipe the main body only with a damp soft cloth!
10. If the jar and blade are hard to clean. You may have to add some warm soapy water in the jar
and run the appliance at speed 1 for a few seconds.
· How to install the airtight seal
Please install the “airtight seal ” according to the gure above.
7. TECHNICAL SPECIFICATIONS
Product model: IronMix
Product reference: 04026
Motor power: 500 W
Maximum blocking power: 1500 W
Heating Power: 1000 W
Rated voltage and rated frequency: 220-240 V ~ 50/60 Hz
Made in P.R.C. | Designed in Spain
8. RECYCLING OF HOUSEHOLD APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), species that old household electrical appliances must not be disposed of
with the normal unsorted municipal waste. Old appliances must be collected
separately, in order to optimize the recovery and recycling of the materials they

Related product manuals