CED CED7000PRO - Timer Modes of Operation; Run Timer Mode

Back button
The back button will take you back one step in the
menu hierarchy. If the back button is pressed while
in the main menu, the timer will switch back to either
Run Timer, Match or Steel-Challenge modes, depending
which one was used last.
Arrow buttons
Use the Up and Down arrow keys to navigate between
menu items. Use the Left, Right, Up and Down arrow
keys to navigate to and highlight the item you wish to
select.
Selection conrmation
To conrm a change within a certain menu item, press
the Enter (E) button. Otherwise press the back button.
Menu -> Mode -> Run timer
The Run Timer mode is the basic function mode of the
timer. In it, the user can press the Start, get the ac-
tivation delay, the beep and record shots. The screen
displays the overall time, rst shot, last shot, individual
shot splits (last 4 shots), Start Delay and String num-
ber.
To get to the Run Timer Mode do the following:
1. Turn on the Timer
2. If not already in the Run Timer mode, select Menu ->
Mode -> Run Timer.
3. Press the Start button at the top of the unit to start
countdown.
4. The timer then records the time & shots.
5. Press the Review button for reviewing the results
(scroll up and down to view the individual shots and
split times).
6. Press the Back button to get back to the Run Timer
screen or press the Start button to immediately run
the timer again.
6