CED CED7000PRO - Display, Sound, and Connectivity

Date
1. Select Menu -> Settings -> Time & Date
2. Select “Set Date”
3. Set date using the left, right, up and down arrow but
tons
4. Press “E” to conrm or the Back button to cancel
Date Format
1. Select Menu -> Settings -> Time & Date
2. Select “Date Format”
3. Use the up and down arrow buttons to swap between
DD/MM/YYYY and MM/DD/YYYY
4. Press “E” to conrm or the Back button to cancel
Menu -> Settings -> Backlight
There are 7 levels of backlight settings from darker to
brighter (1 is the darkest, 7 is the brightest).
1. Select Menu -> Settings -> Backlight
2. Choose the desired level of brightness via the up and
down arrow buttons
3. Press “E” to conrm or Back to cancel
Menu -> Settings -> RFID
The CED7000PRO Timer can be purchased with an
optional RF wireless remote transmitter, which has an
unobstructed broadcast range of up to 50 yards, to com-
municate with a CED BigBoard or CED Time Keeper. To
link a “CED7000PRO-RF” Timer to one of these devices,
do the following:
1. Select Menu -> Settings -> RFID
2. Select a four-digit of your choice using the up, down,
left and right arrow buttons
3. Press “E” to conrm or cancel to go back
17