CED CED7000PRO - Steel-Challenge Mode

Menu -> Mode -> Steel-Challenge
Using your CED7000PRO, you can create and run a Steel
-Challenge training or match.
The CED7000PRO has all the 8 stages of the Steel-Chal-
lenge set up and ready to go, and it supports all major
Steel-Challenge Divisions.
Each shooter is called up in turn, and shoots his 5 (or 4)
runs on each stage. It is possible to record only some
runs, and return later to complete the shooters results.
The Steel-Challenge match is created in a similar fashion
to a Match, with the exception that stages are not need-
ed to be entered since they are all added by default.
Create a Steel-Challenge match
1. Menu -> Mode -> Steel-Challenge -> Create New
2. Add a match name and press the “E” button to con-
rm
3. Add shooters by adding their First Name, Last Name,
Division, Squad and Shooter ID
Run Match
1. Menu -> Mode -> Steel-Challenge -> Run Match
2. Select Stage with the up and down arrow buttons
3. Select Squad
4. Select Shooter
5. Conrm shooter by pressing the “E” button
6. Each Run requires a new press of the Start button
7. When the shooter nished shooting a run, press “E”
to conrm or press the up or down key to Re-Shoot.
Then press Start again when the shooter is ready for
his next string.
8. If penalties are to be added, press the “P” button
multiple times to select a 3, 6, 9, 12 or 30 second
penalty (pressing the “P” button once more clears the
penalty section)
11