CED CED7000PRO - Delay and Par Settings; Advanced Features and Data Management; RO Tools and Firmware Version

again, it will return to the same screen it was on before
the shut off.
1. Select Menu -> Settings -> Auto Shut Off
2. Select between 10min and Off
3. Press “E” to conrm or Back to cancel
Menu -> Settings -> Firmware Version
The CED7000PRO is a software driven timer and as
such there may be rmware updates from time to time,
to incorporate new features. The rmware version indi-
cates which rmware the Timer is currently running.
1. Select Menu -> Settings -> Firmware Version
2. View the rmware version
3. Press “E” or Back to go back
Note
In case of device memory failure, you can restore to
default rmware by pressing the A and P buttons si-
multaneously for 2 seconds. For more information, visit
www.ced7000pro.com.
Menu -> Delay
The CED7000PRO provides four types of Start delays.
A Fixed three-second delay from the time the START
button is pressed to the activation of the buzzer and
clock.
A Random delay provides a randomly selected “two to
ve” second delay, designed to eliminate any anticipa-
tion during individual practice.
An Instant enables total control for the user by activat-
ing the timer instantly upon pressing the Start button.
Additionally, the user can choose a custom delay, by se-
lecting the Custom setting and entering a specic delay
up to 9.9 seconds.
22