CED CED7000PRO - Clear Memory; Self Check; Auto Shut off

Menu -> Settings -> Clear Memory
The user can clear the Timer’s memory (all recorded
shots, scores, time, matches etc), by selecting from the
menu “Clear Memory”. Clearing the memory will not af-
fect any menu settings set by the user.
1. Select Menu -> Settings -> Clear Memory
2. Select Yes/No
3. Press “E” to conrm or Back to cancel
Menu -> Settings -> Self Check
The CED7000PRO incorporates a self-diagnostic test
program enabling the user to check systematically if the
timer is functioning properly. This provides additional
quality control with fast, and easy self check capabilities
in case the timer has been dropped or possibly damaged
in some way.
The program will then give the user instructions to be
followed, which will in turn test each button, key, and
the LCD display for possible damage. When completed,
if all parts and functions are operational, the program
will indicate that the diagnostics have been completed.
If a button or key function is defective, the program will
not continue indicating to the user that repair is re-
quired. If the LCD display is damaged, the user will be
able to visually see dead pixels during the diagnostics
program.
1. Select Menu -> Settings -> Self Check
2. Follow instructions on screen
Menu -> Settings -> Auto Shut Off
To preserve battery life, we recommend using the Auto
Shut Off function. The Auto Shut Off will switch off the
Timer after 10min of inactivity. No data will be lost when
the Timer is switched off. When the Timer is powered up
21