29
• CEDIMA® • Technical Documentation • All rights reserved according to ISO 16016 • Changes serving technical progress reserved •
Preparation and operation
CF•13.3 B / CF•13.3 B-L
ENGLISH
4.8 Adjusting the front visor
DANGER
Risk of pinching or crushing when swivelling
the front visor!
Careful with hands and ngers!
Swivelling down the front visor Figure 4.50
Loose the screw and dislocate the pointer rod accordingly
Figure 4.51
Align the front visor for right and left cut
Swivel down the front visor and align to the diamond saw
blade by using a alignment line or guide rail so that it co-
incides direktly with the cutting line. Therefor dislocate the
pointer rod accordingly as required.
4.9 Cooling and ushing water supply
DANGER
Risk of pinching or crushing when coupling
the connecting hose and when actuating the
water container shut-o valve!
Careful with hands and ngers!
ATTENTION
Guide the water hoses in such a way that the hoses do not
constitute a danger and cannot be damaged!
For cutting, use water that is free of coarse impurities
(free of solids, clean) to prevent blockage of the cooling
system! Do not use salt water!
4.9.1 External water connection
Leave the lled water container mounted, see section 4.9.2!
Connecting hose with Gardena coupling connected to the pressur-
ised water shut-o valve, hose guide for left-hand cut here demon-
strated on the CF•13.2 B Figure 4.53
Connection for external pressurized water hose Figure 4.52
To Next Page
Loading...
