Celestron ASTROMASTER LT 70 AZ User Manual

4
Press and hold the button on the remote for 5 seconds. A blue
light will turn on and, after a few seconds, start to blink. The
remote is now in pairing mode.
Using the Bluetooth settings on your phone, pair the
device called “GBshutter” or “22035”.
Open your camera app. Press the button on the remote to
trigger the shutter on your phone.
If your camera is in video mode, you can press the button
once to start recording and again to stop the recording.
4 5
To insert or replace the battery, place your thumb in
the center of the back cover, pressing inward and sliding
downward remove the battery door. The CR2032 battery
should be inserted with the positive (+) side facing upward.
Replace the cover.
1
2
3
USING THE
BLUETOOTH
REMOTE

Celestron ASTROMASTER LT 70 AZ Specifications

General

Brand	Celestron
Model	ASTROMASTER LT 70 AZ
Category	Telescope
Language	English