Need help?Do you have a question about the Celestron STARSENSE EXPLORER 8 DOBSONIAN and is the answer not in the manual?
General| Type | Dobsonian |
|---|---|
| Optical Design | Newtonian Reflector |
| Focal Length | 1200 mm |
| Focal Ratio | f/5.9 |
| Mount Type | Dobsonian |
| StarSense Technology | Yes |
| Eyepiece | 25 mm (48x) |
| Highest Useful Magnification | 480x |
| Lowest Useful Magnification | 29x |
| Resolution (Rayleigh) | 0.69 arcseconds |
| Resolution (Dawes) | 0.57 arcseconds |
| Optical Coatings | Fully Coated |
| Aperture | 203 mm |
| Finderscope | StarSense |
| Limiting Stellar Magnitude | 14 |
Attaches side supports to side panels and side panels to the front panel.
Secures the top plate and attaches the feet to the bottom plate.
Assembles and installs the azimuth pivot bolt, washers, and cylinder.
Installs the base handle and the eyepiece rack onto the front panel.
Attaches altitude bearing cylinders and rubber bumper to the base.
Mounts the optical tube assembly and installs tensioning knobs.
Installs the StarSense dock and StarPointer red dot finderscope.
Attaches the 2" extension tube and 2"-to-1.25" eyepiece adapter.
Instructions for downloading, installing, and activating the StarSense Explorer app.
Guidance on how to move the telescope for observation.
Steps to align the StarPointer red dot finderscope with the telescope.
Instructions for attaching the smartphone to the telescope.
Guidance for initial observation sessions and app usage.
To Next Page