What to do if my Cello LED TV has no sound?
If your Cello LED TV has no sound, first ensure that the sound isn't muted. Next, check the volume settings to make sure the volume isn't set too low. Also, if you're using external leads, verify that they are correctly connected.
Why does my Cello LED TV show a blue screen?
A blue screen on your Cello LED TV typically indicates either no signal or an incorrect source being selected. Try pressing the Source button to select the correct source.
What to do if Cello C22ZF-LED is dead but LED is lit red?
If your Cello LED TV's LED is lit red but the screen is dead, the set is likely in standby mode. Press either the Power button on the TV or on the remote control to turn it on.
How to improve noisy picture on Cello C22ZF-LED LED TV?
If you're experiencing a noisy, snowy, or ghosting picture on your Cello LED TV, it's likely due to a poor aerial signal. If you're using an indoor aerial, try repositioning it. Also, check all aerial connections to ensure they are secure.
Why my Cello LED TV is dead and no LED is lit?
If your Cello LED TV is completely dead and no LED is lit, it indicates that there is no power getting to the TV. Check all power connections to the TV.
What to do if my Cello C22ZF-LED LED TV screen shows "NO DISC"?
If your Cello LED TV screen displays "NO DISC", ensure the disc is placed correctly with the mirror side facing you if it's single-sided. Also, inspect the disc for damage or dirt. If damaged, discard it. If dirty, see "Disc care" page 42.
Highlights the importance of reading safety precautions before operation.
Provides essential safety guidelines for operating the TV.
Details the purpose of various buttons on the remote control.
Step-by-step guide for inserting batteries into the remote.
Instructions on how to operate the remote control effectively.
Guide on how to connect the TV to an antenna for signal reception.
Table detailing names and functions of various TV connection ports.
Important safety notes before connecting external devices.
Critical safety warning before inserting modules into the CI slot.
Guide for the initial setup and channel tuning process.
Settings related to PVR functionality and viewing schedule/recorded lists.
How to set up timer recordings and manage the PVR storage.
Instructions on how to start, pause, and stop recordings and timeshift.
Troubleshooting tips for general TV issues like no power or signal.
Troubleshooting tips specific to DVD playback issues.
General| Screen Size | 22 inches |
|---|---|
| Display Type | LED |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| VGA Port | Yes |
| Built-in Speakers | Yes |
| Resolution | 1920 x 1080 |
To Next Page
