Clearance to Combustibles
Sides .. 4 in. (100mm)
Floor .. 15 3/4 in. (400mm)
Top .... 0 in. (0mm)
Back .. 0 in. (0mm)
INSTALLING THE APPLIANCE
Step 1: Using a screwdriver loosen the two screws that secure the wall mounting bracket to
the top of the appliance and remove the wall mounting bracket as shown below (Figure 1).
Figure 1
Step 2: Choose a solid and plain wall. Position the mounting bracket where the appliance is
to be installed on the wall and ensure that the bracket is level using a spirit level. Using a
pen mark the 4 holes through the 4 holes on the mounting bracket as shown below (Figure
2)
Figure 2
To Next Page
Loading...