EasyManua.ls Logo

Cely PI100 Series - APOLLO; SAMSUNG POLONIA CASH REGISTER PROTOCOL

Cely PI100 Series
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TEST AND ADJUSTMENTS
49TPI10EN04
11
7.2. APOLLO / SAMSUNG POLONIA CASH REGISTER
PROTOCOL
Protocol
Cash Register Scale
E
q
A
K
D
1
S
H
S
x
SXWW.WWWkgB
cc
E
x
E
T
/ NAK
D
2
S
H
S
x
PPPPPPPPB
cc
E
x
S
x
SXWW.WWWkgB
cc
E
x
S
x
IIIIIIIIB
cc
E
x
E
T
/
NAK
Where:
E
q
: 0x05h A
K
: 0x06h
D
1
: 0x11h D
2
: 0x12h
S
H
: 0x01h S
X
: 0x02h
S: Weight status.
S: 0x53h stable.
U: 0x55h Unstable.
X: 0x20h, 0x46h, 0x2Dh
PPPPPPPP: 8 characters for price (the first 2 to 0).
WWWWW: 5 characters for weight.
IIIIIIII: 8 characters for amount (the first 2 to 0).
.: 0x2Eh
kg: 0x6Bh y 0x67h
B
cc
: Checksum, logical sum (XOR) from S of weight
status..
E
x
: 0x03h
E
T
: 0x04h
NAK : 0x15h
NOTE:
- The X can take the values:
o ' ' (0x20): when the weight is valid.
o 'F' (0x46): when the weight is erroneous or invalid.
o '–' (0x2D): when the weight is negative (for example: Tare without plate).
- The S can take the values:
o ‘S’ (0x53): when the weight is stable.
o ‘U’ (0x55): when the weight is unstable.
- If the weight is unstable momentary value is sent in the field WW.WWW. For the answer
D
2
, the price entered on the scale is sent and the amount is sent to 0.
- If the weight is erroneous (with "--------" on the display) the Scale replaces the X and the
weight by FFFFFFF. In the case of the D2 response frame, the price is the entered on the
Scale and the amount is displayed to zero.
- If the scale has a tare weight, it sends the net weight in the field WWWWW.
- If when the frame D
2
is sent the weight is negative, the scale responds with the price
entered on the scale and the amount to zero.
- If the scale receives a frame with an incorrect format, the scale responds with NAK.
- The scale takes into account the minimum weight adjustment. If this adjustment has the
value 1 the scale responds with NAK if the weight is lower than 20 steps.
- Between different requests the weight must vary at least 20 steps or pass through zero,
otherwise the scale responds with NAK.
- The minimum variation or zero crossing, and adjustment of minimum weight, also affect to
request frame of only weight