CEM DT-9929 - Technical Specifications Final; Battery, Fuses, Environmental Specs; Safety Standards Compliance

26
Battery One 9 volt (NEDA 1604) battery
Fuses mA, µA ranges; 0.5A/1000V ceramic fast
blow A range; 10A/1000V ceramic fast blow
Operating Temperature 41ºF to 104ºF (5ºC to 40ºC)
Storage Temperature -4
o
F to 140
o
F (-20
o
C to 60
o
C)
Operating Humidity Max 80% up to 87ºF (31ºC) decreasing
linearly to 50% at 104ºF (40ºC)
Storage Humidity <80%
Operating Altitude 7000ft. (2000meters) maximum.
Weight 0.753lb (342g) (includes holster).
Size 7.36” x 3.2” x 2.0” (187 x 81 x 50mm)
(includes holster)
Safety This meter is intended for origin of
installation use and protected, against the
users, by double insulation per EN61010-1
and IEC61010-1 2
nd
Edition (2001) to
Category IV 600V and Category III 1000V;
Pollution Degree 2. The meter also meets
UL 61010-1, 2
nd
Edition (2004), CAN/CSA
C22.2 No. 61010-1 2
nd
Edition (2004), and
UL 61010B-2-031, 1
st
Edition (2003)