CEM DT-9935 User Manual

1.Safety Summary
The following safety precautions apply to both operating and
maintenance personnel and must be observed during all phases
of operation, service, and repair of this instrument.
Do not operate the instrument in the presence of flammable
gases or fumes. Operation of any electrical instrument in such an
environment constitutes a definite safety hazard.
Instrument covers must not be removed by operating personnel.
Component replacement and internal adjustments must be made
by qualified maintenance personnel.
Do not install substitute parts or perform any unauthorized
modifications to this instrument. Return the instrument to
distributor for service and repair to ensure that safety features
are maintained.
and statements, such as the following
examples, denote a hazard and appear throughout this manual.
Follow all instructions contained in these statements.
A statement calls attention to an operating procedure,
practice, or condition, which, if not followed correctly, could result
in injury or death to personnel.
A statement calls attention to an operating procedure,
practice, or condition, which, if not followed correctly, could result
in damage to or destruction of part or all of the product.
Do Not Operate In an Explosive Atmosphere
Keep Away From Live Circuits
Do Not Substitute Parts or Modify The Instrument
Warnings And Cautions
Warning Caution
Warning
Caution
3
Dual Display LCR Meter Instruction Manual

CEM DT-9935 Specifications

General

Brand	CEM
Model	DT-9935
Category	Measuring Instruments
Language	English