What to do if Cembre Printer print head is not raised?
If the print head is not raising on your Cembre printer, switch the MG3 OFF and then ON again after a few seconds. Press the BLUE button (4) to move the carriage and ensure it is operating correctly.
What to do if Cembre Printer ribbon is not present?
If the printer ribbon is not present, check the condition of the ribbon and ensure that it is threaded correctly. After checking the ribbon, switch the MG3 OFF and then ON again after a few seconds.
What to do if Cembre Markingenius MG3 Printer MG3 electronic controller malfunction?
If there is an MG3 electronic controller malfunction, switch the MG3 OFF and then ON again after a few seconds.
Diagram and explanation of the printer's physical components and their labels.
Step-by-step instructions for loading the printer ribbon correctly.
Guide to positioning various types of media sheets onto support templates for printing.
Instructions for selecting and placing correct support templates onto the printer carriage.
Procedure for initiating and managing the printing process and removing printed media.
Procedure for cleaning the printer head using a dedicated cleaning kit.
Guidelines for regular cleaning of the printer's exterior and internal parts.
Instructions for replacing internal fuses for overcurrent protection.
General| Printing Technology | Thermal transfer |
|---|---|
| Resolution | 300 dpi |
| Connectivity | USB |
| Material | Plastic, metal components |
| Type | Portable printer |
| Battery | Li-ION |
| Operating System Compatibility | Windows |
To Next Page
