To Next PageTo Next Page
Need help?Do you have a question about the CEN-TECH 64981 and is the answer not in the manual?
General| Model | 64981 |
|---|---|
| Category | Diagnostic Equipment |
| Display Type | LCD |
| Backlight | Yes |
| Auto Power Off | Yes |
| Battery Type | 9V |
| Safety Rating | CAT III 600V |
| SAE J1979 | No |
| Internet Updateable | No |
| Current Range (AC) | 200µA to 10A |
| Current Range (DC) | 200µA to 10A |
| Resistance Range | 200Ω to 20MΩ |
Explains safety alert symbols and their meanings for potential hazards.
Guidelines for maintaining a safe and clean workspace to prevent accidents.
Precautions to avoid electrical shock hazards when using the product.
Safety measures for the user to protect themselves during operation.
Information regarding user-serviceable parts and professional repair.
Technical details including display type, operating and storage temperatures, and power requirements.
Explanation of the OBD II system and its function in vehicle diagnostics.
Information on the types of vehicles the Code Reader is compatible with.
Glossary of terms and acronyms used in the manual and OBD II systems.
Explanation of Inspection and Maintenance monitors and their types.
Lists continuous and non-continuous monitors for gasoline and diesel engines.
Explanation of DTC types (Pending, Stored, Permanent) and their meanings.
Essential pre-operation steps, including reading safety information.
Description of the Code Reader's physical components, screen, lights, and buttons.
Instructions for connecting the Code Reader to the vehicle's diagnostic port and achieving readiness.
Overview of the selections available in the Code Reader's main menu.
Detailed steps for performing a diagnostic scan and reading codes.
How to understand the scanning results, including DTC count and monitor status.
How to scroll through and view individual DTCs and their sequence.
Instructions and warnings regarding the deletion of diagnostic trouble codes from the vehicle.
The process of confirming erasure and interpreting success or failure messages.
How to check Emissions System readiness status for state inspections.
How to interpret the YES, NO, READY, NOT RDY, and N/A indicators for monitors.
How to retrieve and view the vehicle's 17-digit Vehicle Identification Number.
Function to retrieve current data or relink the reader to the vehicle if communication is disrupted.
List of definitions for Diagnostic Trouble Codes starting with P00.
List of definitions for Diagnostic Trouble Codes starting with P01.
List of definitions for Diagnostic Trouble Codes starting with P02.
List of definitions for Diagnostic Trouble Codes starting with P03.
List of definitions for Diagnostic Trouble Codes starting with P04.
List of definitions for Diagnostic Trouble Codes starting with P05.
List of definitions for Diagnostic Trouble Codes starting with P06.
List of definitions for Diagnostic Trouble Codes starting with P07.
List of definitions for Diagnostic Trouble Codes starting with P08.
List of definitions for Diagnostic Trouble Codes starting with P09.
Procedures for inspecting the Code Reader's condition before each use.
Guidelines for cleaning the device and storing it safely and properly.
Common problems, their causes, and likely solutions for the Code Reader's operation.
Terms and conditions of the product's limited warranty coverage.
