How to reduce too much foam in Centek Washer?
If there is too much foam in your Centek Washer, use a detergent suitable for machine washing, marked «For washing machines» or «Machine wash». Also, reduce the amount of detergent used, especially if the water is soft.
How to fix low drying effect in Centek Washer?
To improve the drying effect of your Centek Washer, separate hard-to-dry and easy-to-dry items. Reduce the clothing load for drying. Avoid mixing wet and dry clothes. Ensure that the water supply valve is open during drying and that the drain pump filter is clean. Check the drain hose for kinks, twists, or blockages.
What to do if temperature is too high in Centek CT-1952?
Press Start/Pause to suspend the washing program. Wait for a few minutes. When the temperature in the drum drops to a safe level press Start/Pause to resume the rest of the program.
What to do if negative ion level in the drum is too high in Centek Washer?
Press Start/Pause to stop the washing cycle and wait for a few minutes for the anionic count to drop and the error message to disappear.
What to do if miscellaneous errors occur in Centek Washer?
Turn the machine off, disconnect the power cable and contact the service center for repairs without delay.
Intended use for household textiles, indoor use only, not for commercial purposes.
Follow instructions to minimize risks of fire, shock, injury, or loss of life.
Handle damaged cords/machines carefully, use grounded outlets, avoid improper connections.
Proper placement, water/electrical connections, initial run, and avoiding hazards.
Requirements for stability, leveling, and clearances for proper operation.
Essential step to prevent damage and vibration during operation.
Adjust feet for stability and check for wobbling.
Professional connection, pressure requirements, and hose handling.
Safe electrical connection, dedicated circuits, and prohibited accessories.
Sorting clothes by fabric type, color, and dirt level.
Proper loading techniques, pocket checks, and stain preparation.
Detailed explanation of each button and display indicator.
Automatic program selection based on laundry parameters.
Disconnect power and water before cleaning; avoid solvents and chemicals.
Possible causes: plug, power, fuse, or door not closed.
Possible causes: door, ON/OFF, or Start/Pause buttons not pressed.
Causes: water valve, hose, pressure, or filter issues.
Causes: pump filter, kinked hose, or blocked drain.
Causes: machine not leveled, transport bolts, or load imbalance.
Explanation of error codes E02 (No water filling) and E03 (Drain problems).
Troubleshooting for error codes U4, H, FXXX, EX.
Details on guarantee period, validity, exclusions, and consumer rights.
To Next Page
General