MINI CLAMP METER Instruction Manual
8
4.3
ACV Measurement:
WARNING!
Maximum Input Voltage is 600V AC/DC. Do not attempt to
Take any voltage measurement that may exceed to avoid
Electrical shock hazard and/or damage to this instrument.
Switch the function selector to V ~ range.
Connect red test lead to “+” terminal and black one to the
“COM“ terminal.
Measure the voltage by touch the test lead tips to the test
circuit where the value of voltage is needed.
Read the result from the LCD panel.
OFF
600A
600V
300V CAT III
600V CAT II
COM
ZERO
V
V
A
A
Press
2 Sec
PEAK
HOLD
300V CAT III
600V CAT II
To Next Page
Loading...
