MINI CLAMP METER Instruction Manual
2
II. Specification
General Specification:
Digital Display:
4 digits LCD display with maximum reading 9999
Over Load:
When the signal input is larger than the maximum will be
show “
OL”.
Sample Rate:
2 times/sec
Peak Hold Sample Rate:
10ms at DCV, DCA
Low Power Indication:
When the battery is under the proper operation range,
symbol will appear on the LCD display.
Auto Power Off:
The meter will power it self OFF if there is no push button
or rotary switch operation for 30 minutes.
Power Source: UM-4 or AAA 1.5V battery x 2.
Battery Life: 50 hr approx. (alkaline battery)
Clamp opening size: 25mm
Dimension (L x W x H) :
189x70x34mm, 7.44x2.76x1.33 inch
Weight: 220g( include battery)
Accessory:
Instruction Manual, Carrying Case, Test lead, Battery
1.5Vx2
To Next Page
Loading...
