CONTENTS
TITLE PAGE
1. General Description….…………………………………………………….……………..1
2. Safety Information………………………………………………………………………...
1
3. Features…………………………………………………………………………………….1
4. Specifications……………………………………………………………………………... 2
5. Symbol Definition and Button Location………......................................................
3
6. Button Instructions ………………………….…………………...................................5
6.1 Power ON/OFF button…………………………………….....................................5
6.2 Backlight button………………….......................................................................5
6.3 Data-Hold button……….....................................................................................5
6.4 REC button…..…………………..........................................................................5
6.5 MEM button…..………………….........................................................................5
6.6 RECALL Saved Reading Button……………………..........................................6
6.7 MAX/MIN/AVG Button…………………...............................................................6
6.8 Selecting Temperature Units…………………………........................................6
6.9 SETUP Button………………………………………...…………………..................6
7. Operating Instructions…………………………………………...........………………...6
7.1 Setup Options……………………………………..................................................
6
7.2 Menu Item………………………………………………………...............................6
7.3 Menu Description………………………………………………..............................8
7.3.1 Select thermocouple type.………...……………………..............................8
7.3.2 Setting interval time for data storing.…………………...............................8
7.3.3 Set offset to compensate for probe errors.……………............................8
7.3.4 Set alarm point (only for channel T1).……………...…………..................8
7.3.5 Set T1-T2 subtraction mode.………………...…........................................
9
7.3.6 Set auto power off time.…………..……………….………..........................9
7.3.7 Set system clock.………………………….………......................................9
7.4 Clearing Data
Logger Records.……..……………….......................................10
7.5 Clearing Instant Read-out Memory.…..…………….………............................10
7.6 Connecting To A computer.…………….….…………......................................10
8. Power Preparation………………………………………………………………...........10
8.1 Battery Replacement……………………………………………………….............10
9. Testlink SE-520 Software………………………………………….…….....................11
10. Maintenance.….….……………………………………………………………...…..…17
To Next Page
Loading...
