Center 520 - MAX;MIN;AVG Button; Selecting Temperature Units; SETUP Button; Operating Instructions

DATALOGGER THERMOMETER
6
6.7 MAX/MIN/AVG Button:
Under this mode, the unit simultaneously monitors and stores the maximum, minimum and
average value in the memory. The unit will keep updating/refreshing the data.
To start:
(1) Press button. “ ” symbol lights up on LCD, the reading shows the maximum data.
(2) Press button again to show minimum data; the “ ” symbol lights up on LCD.
(3) Press button again to show average data; the “ ” symbol lights up on LCD.
(4) Press button again, the “ , and ” symbol blinks together, the readings
shows real time data.
To exit MAX/MIN/AVG mode:
Press and hold button for 2 seconds to exit MAX/MIN/AVG mode.
6.8 Selecting Temperature Units:
Press the button to switch between Celsius (°C) and Fahrenheit (°F).
6.9 SETUP Button:
Press the button to enter setup options. Press again to exit setup mode anytime.
7. OPERATING INSTRUCTIONS
7.1 Setup Options:
(1) Press the button to enter setup options. Press it again to exit anytime.
(2) Using the
, , , button to adjust parameters or move setting items.
(3) Press the
button to save changes and move to next setting option.
7.2 Menu Item:
(1) Fig.1 Set thermocouple type.