To Next PageTo Next Page
Need help?Do you have a question about the Central Machinery 36066 and is the answer not in the manual?
General| Spindle Taper | MT2 |
|---|---|
| Tailstock Taper | MT2 |
| Motor Power | 3/4 HP |
| Voltage | 120V |
| Distance Between Centers | 12 in. |
| Spindle Bore | 0.63 in |
Instructions for assembling and positioning the tool rest for lathe operations.
Steps to attach the sanding disc to the lathe's main spindle.
Procedure for attaching the work table and miter gauge assembly to the lathe.
Guide for assembling the tail center and aligning it with the workpiece.
Overview of necessary tools and general guidance for selecting and using lathe tools.
Details on different types of gouges, their sizes, and proper usage techniques.
Information on wood turning chisels, their types, and cutting methods.
Description of round nosed chisels for shaping and decorative work.
Guide to diamond point chisels for V-grooves and square shoulder cleanup.
Explanation of parting tools for cutting and squaring off workpiece ends.
Step-by-step instructions for setting up and performing turning between centers.
Instructions for faceplate turning, commonly used for bowls and concave shapes.
Steps for mounting and using the disc sander attachment on the lathe.
Procedure for changing spindle speeds by adjusting the belt on the pulleys.
