Central Machinery T34706 - Adjustments; Headstock Positioning

VI. Adjustments
Headstock (Figure 9)
1. The headstock has 5 preset positions.
0° setting for all spindle turning
applications.
60° / 90°/ 120” for use when
making face plate turnings.
180° fur use for face plate turnings when
using the extension bed and tool rest.
2. To set the headstock at the desired position,
you must first turn the head lock handie [1]
until you have completed at least one rotation.
(Figure 10)
. Pull out the headstock release [2]. Rotate
the entire headstock clockwise to the desired
setting. The headstock will be fixed in position
when it clicks into one of the five preset
settings. Tighten the lock handle [1].
WARNING:
DO
NOT
TURN
THE
HEADSTOCK
ASSEMBLY
MORE
THAN
180°
CLOCKWISE
FROM
THE
SPINDLE
SETTING
POSITION
OR
DAMAGE
TO
WIRING
MAY
OCCUR.”
DO
NOT
TURN
THE
HEADSTOCK
DO
NOT
TURN
THE
HEADSTOCK
ASSEMBLY
COUNTERCLOCKWISE
ASSEMBLY
CLOCKWISE
BEYOND
THIS
POSITION
BEYOND
THIS
POSITION