Page 16 For technical questions, please call 1-800-444-3353. SKU 92917
93253
Clearing Jams
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION, BEFORE ANY
MAINTENANCE OR REPAIRS
ARE DONE (including clearing
jams):
• Wear ANSI-approved safety
goggles with side shields.
Other people in the work area
must also wear ANSI-approved
impact safety goggles with side
shields.
Release the trigger.•
Detach the air supply.•
Attempt to re the Tool into •
a piece of scrap wood to
ensure that it is disconnected
and is incapable of ring any
fasteners.
Empty the canister and leave •
it open during service.
Press down on the Pin (91) and 1.
swing the Door (53) open.
If a fastener is jammed in the 2.
discharge area, remove it with pliers.
If you are unable to clear the fastener 3.
jam using the method prescribed
above, the tool should be taken to a
qualied service technician for proper
servicing.
To Next Page
Loading...
