EasyManua.ls Logo

Central Pneumatic 95498 - Page 11

Central Pneumatic 95498
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SKU 95498 For technical questions, please call 1-800-444-3353. Page 11
To Stop The Compressor:
Push down on the Pressure Switch (64) to its 1. “STOP” position.
Unplug the Air Compressor from its electrical outlet.2.
Turn the Air Outlet Valve (68) to its 3. closed position. (See Figure F.)
Squeeze the trigger on the pneumatic tool to release any remaining air pressure 4.
from the tool. Then disconnect the air hose from the tool, and store the tool in a
clean, dry, safe location out of reach of children.
Disconnect the other end of the air hose from the Compressor’s Air Outlet Valve 5.
(68), and store the air hose in a clean, dry, safe location out of reach of children.
Pull out on the Safety Release Valve (62) to release all remaining air pressure from 6.
the Air Tanks (51). (See Figure F.)
Remove any moisture in the Air Tanks (51) by opening the Tank Drain Valve (52). 7.
Then, retighten the Drain Valve. (See Figure F.)
Allow the Air Compressor to completely cool. Then store the unit in a clean, dry, 8.
safe location out of reach of children.

Related product manuals