Page 2 • Central Blower Restaurant Exhaust Fan Catalog
Series RE
Scoop with Grease Trough
▲ Sealed to blower housing with high temperature
silicone foam
▲ Grease trough easily removed for draining
▲ Drain on grease trough allows rain water to
run off while grease stays inside
▲ Can be extended up or out for
special applications
▲ Scoop can be removed for
extended discharge
Blower Housing
▲ Heavy gauge zinc coated steel
▲ U.L. recognized powder coating
▲ Housing continuously welded
top and bottom
Tilt Open Top
Cover Assembly
▲ Heavy duty self cleaning
backward inclined wheel
▲ Drives stay in adjustment
when open for service
▲ Sealed to blower housing with
high temperature silicone foam
▲ Heavy duty relubricatable
bearings
▲ Latch locks cover open
when cleaning
▲ Spare belt stored under
weather cover
Safety Disconnect
Switch
▲ Standard
(specify H.P., voltage and phase)
▲ Weather proof enclosure
▲ Factory wired to motor
91Z0
Central Type RE
Centrifugal Blowers
are available as
U.L. Listed for
Grease Removal
(UL762)
Central Blower Co. certifies that the
Belt Drive Blowers shown on pages
2 through 15 are licensed to bear
the AMCA Seal. The ratings shown
are based on tests and procedures
performed in accordance with
AMCA Publication 211 and comply
with the requirements of AMCA
Certified Ratings Program.
To Next Page
Loading...