Configuration menu:
Configure the system by selecting installed components! Some components exclude others
(eg. you can choose radiator heating or floor heating, not both of them), some components can
be selected only with another component (eg. room thermostat can be selected only if you
select radiator h. or floor h., if you don't select this component room thermostat can't be
selected).
Configuration
When the configuration contains motor drive, you need to enter VALVE TIME.
This parameter defines how many seconds is required for mixing valve
opening/closing.
THIS NUMBER MUST CORRESPOND EXACTLY TO THE TIME IT TAKES THE
MOTOR DRIVE TO OPEN THE VALVE (DEPENDS ON THE TYPE OF MOTOR)
Technical instructions REGULATION BioTec-L
8
To Next Page
