CeraGem MASTER V4 - Remote Control Layout

Wait!
- When pausing, the internal projector will move down vertically in order
to prevent burns and injury.
(When the mode is executed again, the set strength will be restored.)
- When 5 minutes have passed after pausing, the product will turn off
automatically.
Wait!
- When pausing, the internal projector will move down vertically in order
to prevent burns and injury.
(When the mode is executed again, the set strength will be restored.)
- When 5 minutes have passed after pausing, the product will turn off
automatically.
1. Turn on the remote control, check the current status
and press the semi-automatic mode button twice.
2. Move the internal projector to the desired position
using the up/down button.
3. When body shape sensing ends, the Semi-automatic
master mode will begin. Maintain correct posture.
- The time remaining will be displayed at the top of the human body icon.
- If the remote control is operated while using the product, the time
remaining will be initialized.
- When 60 minutes have passed after operating the remote control,
the remote control will turn off automatically and the mode will end.
1. Turn on the remote control, check the current status
and press the semi-automatic mode button.
2. Move the internal projector to the desired position
using the up/down button.
32
3. How to use the remote control 3. How to use the remote control
33
3. The semi-automatic mode will begin at the designated
position. Maintain correct posture.
- The time remaining will be displayed at the top of the human body icon.
- If the remote control is operated while using the product, the time
remaining will be initialized.
- When 60 minutes have passed after operating the remote control,
the remote control will turn off automatically and the mode will end.
- The selected position will be displayed in green.
* In semi-automatic mode, the internal projector will not move to the cervical spine after the
mode ends.
* In semi-automatic master mode, the internal projector will not move to the cervical spine after
the mode ends.
Approximately 60 minutes.
Duration for mode
Approximately 60 minutes.
Duration for mode
Using semi-automatic mode (master mode)Using semi-automatic mode
Neck area(cervical spine)
Back area(thoracic vertebrae)
Waist area(lumbar vertebrae)
Position Screen display (24 segments)
C1~7
T1~12
L1~5
English
English