15
3. Installation
14
* After you purchase the product, a professional installation technician
will carry out the basic assembly process.
모델명 CGM MB-1901
품목명 개인용온열기
정격전압AC220V, 50/60Hz 소비전력
사용목적 근육통완화 제조허가 제 697 호
품목허가 포장단위 1BOX/1SET
등록번호
제조사
제조번호
제조년월
주식회사 세라젬
충남 천안시 서북구 성거읍 정자1길 10
TEL : 041-523-2550 / FAX : 041-523-2560
* 본제품은 의료기기 입니다.
380VA
R-R-cer-CGMMB-1901
제인 14-1353 호
4. Check after installation
Press the power key of the remote control and check whether the
display turns on.
2
*For the remote control’s screen, refer to page 20.
Turn on the power at the side of the main body.
(Please turn off the power when the product is not being used.)
After fastening the supporting mat to the sliding rail, place the main body mat
(which is attached to the head cushion and the outer fabric) onto the main body
frame. (After moving the supporting frame to the middle of the main body, push in the
main body mat completely.)
Take out the product and its components from the box.
1
2
Assemble the remote control cradle to the frame and attach the remote
control to the cradle.
4
Connect the cable which is attached to the main body to the connector of the
supporting frame.
(Open the supporting frame before connecting.)
3
Check the remote control, abdominal vibration projector and
3-sphere projector connector, and connect them correctly.
Connect the power cord to the main body and plug into a socket.
7
Before connecting the power cord, connect the remote control first.
6
5
Caution
1. According to the user, set the temperature appropriately when using the product.
2. When sitting down and using the product, open the supporting frame completely.
3. After using the product, turn off the power on the remote control and then turn off
the main body.
English
English
To Next Page
Loading...
