2. Check before product installation
13
1. Check product’s composition
12
1
2
3
4
5
6
7
8
9
3-sphere projector
Easy to use on body parts such as the abdomen, shoulders, arms, legs and etc.
Can be used with the main product or shared between two people.
Projector covers (abdominal vibration projector and 3-sphere projector)
Can be used to cover the external projector.
Remote control cradle(Bolt)
The remote control cradle can be assembled onto and used on the main body
of the product.
User manual
Explains use of the product.
Abdominal vibration projector
This can be connected to the main body and used on the abdomen.
10
11
12
Remote control
Used to check the product functions and operating condition of the product.
Remote control back label
Explanation of the buttons on the remote control (attaches to the back of the remote
control).
Power cord
Connects with the main body and plugs into an outlet for use.
Outer fabric
Protects against product contamination and burns; this detachable
fabric makes washing easy.
Head cushion
This is attached to the top of the product.
Assembly guide
Product assembly methods are described.
Waterproof cover
Use the waterproof cover to protect your product when transporting or storing.
Install where the ground is flat to avoid the risk of damaging the product.
Try and avoid installation where there is a lot of humidity or dust.
(To avoid electric shocks or fire.)
Install according to the designated order.
Do not drop the product or apply any force to it.
(This could cause malfunctioning.)
When installing, check that the rated voltage is 220-240V~.
(To avoid circuit damage or fire.)
Do not use damaged power cords, plugs or old sockets.
After you purchase the product, a professional installation technician will
install it. Do not assemble or disassemble the product yourself.
1
2
4
3
5
6
7
English
English
To Next Page
Loading...
