1. Self inspection
38
2. Management techniques and storage methods
39
Inspection points before use
Inspection points after use
1. Have the remote control and LCD screen been turned “OFF”?
2. Did you check whether main body’s power button is “OFF”?
3. Is the power cord disconnected from the socket?
1. Is the power cord connected to the socket?
2. Did you check whether the main body’s power button is “ON”?
3. Is the remote control power and the LCD screen “ON”?
4. Did you check whether the projector’s temperature has been set to the appropriate level?
5. Is there anything strange on the exterior?
6. Did you check whether there is no damage to the external projector cover?
Exterior of the product is a petroleum-based product and should not be
exposed to organic solvents such as acetone, ballpoint pen, gasoline, thinner,
sweat, hair mousse or hair spray.
Where there is direct contact with the head or skin, wipe with a dry cloth.
If there is contact with cosmetic products or volatile emulsions and is left for
a long time, the surface may peel off so wipe with a dry cloth as soon as
possible.
When washing the outer cloth, use a neutral detergent and wash alone
by hand.
If there is contact with hot objects or heat, the leather will curl up so
please use caution.
Avoid wearing clothes that may cause stains when using the product.
(Please be careful as there is a risk of contamination caused by external
friction.)
Store the product at room temperature, away from direct sunlight or
humidity.
(Discoloration and deterioration of the product may occur.)
1
2
4
3
5
6
7
English
English
To Next Page
Loading...
