Do you have a question about the Cessna 172 and is the answer not in the manual?
Manufacturer | Cessna |
---|---|
Model | 172 |
Engine | Lycoming IO-360-L2A |
Wingspan | 36 ft 1 in (11.0 m) |
Length | 27 ft 2 in (8.28 m) |
Height | 8 ft 11 in (2.72 m) |
Maximum Takeoff Weight | 2, 450 lb (1, 111 kg) |
Cruise Speed | 124 knots (143 mph, 230 km/h) |
Crew | 1 pilot |
Type | Single-engine, high-wing |
Capacity | 4 |
Horsepower | 160 hp |
Propeller | Fixed-pitch |
Fuel Capacity | 56 US gal (212 L) |
Stall Speed | 48 knots |
Range | 696 nm (801 mi, 1, 289 km) |
Number Built | Over 44, 000 |
Maximum Speed | 140 knots |
Service Ceiling | 13, 500 ft (4, 115 m) |
First Flight | 12 June 1955 |
Rate of climb at sea level and performance data.
Maximum altitude for sustained flight operations.
Ground run and total distance over 50-foot obstacle.
Ground roll and total distance over 50-foot obstacle.
Stall speeds with flaps up and down.
Maximum weight allowed for baggage.
Standard and optional fuel tank capacities.
Pre-engine start procedures and checks.
Steps for starting the aircraft engine.
Pre-takeoff checks and configurations.
Procedures for normal and maximum performance take-offs.
Airspeed and throttle settings for climbing.
Power settings and adjustments for cruise flight.
Procedures for descending the aircraft.
Pre-landing checks and configurations.
Procedures for aborting a landing.
Steps for a typical landing approach and touchdown.
Post-landing procedures.
Steps to safely secure the aircraft after flight.
Details on fuel tanks, selector valve, and system operation.
Overview of the aircraft's electrical system components and schematic.
Operation and function of the main electrical power switch.
Function and interpretation of the ammeter reading.
System for detecting and indicating over-voltage conditions.
Protection devices for electrical circuits.
Description of exterior and interior lighting systems.
Operation and control of the wing flap system.
Controls and operation of cabin climate systems.
Usage and adjustment of shoulder harnesses.
Description of optional seat belt and harness systems.
Detailed procedures for engine starting in various conditions.
Visual guide for taxiing with different wind conditions.
Procedures and considerations for taxiing the aircraft.
Procedure for checking magneto operation.
Procedure for verifying alternator and voltage regulator function.
Details on power checks and take-off procedures.
Recommended flap settings for different take-off scenarios.
Techniques for taking off in crosswind conditions.
Procedures for engine failure after take-off and during flight.
Emergency landing without power and precautionary landings.
Procedures for landing on water.
Actions to take in case of engine or electrical fires.
Handling loss of visual reference in clouds.
Procedures for safe descent through clouds.
Steps to recover from a spiral dive.
Procedures for encountering unexpected icing.
Types of operations the aircraft is certified for.
Permitted maneuvers and load factors in normal category.
Permitted maneuvers and load factors in utility category.
Never exceed, structural, and maneuvering speed limits.
Limitations on engine power and speed.
Color markings and ranges for engine instruments.
Indication of fuel quantity and unusable fuel.
Normal operating ranges for engine RPM at different altitudes.
Information on determining aircraft weight and center of gravity.
Safe methods for maneuvering the aircraft on the ground.
Procedures for securing the aircraft against wind damage.
Recommended cleaning and care for plastic surfaces.
Recommendations for maintaining painted exterior finishes.
Cleaning and care for aluminum surfaces.
Inspection and maintenance of propeller blades.
Cleaning and maintenance of the aircraft interior.
Location and purpose of identification plates.
Table for converting indicated airspeed to calibrated airspeed.
Stall speeds under various conditions.
Take-off distances from hard surface runways.
Data on climb rates at different altitudes and weights.
Performance data for cruise flight at various altitudes and power settings.
Landing distances on hard surface runways.
Graph showing glide distance versus altitude.
Description and installation of the cold weather kit.
System for using external power sources.
Operation of the alternate static pressure source.
Operation of audio switching systems for radios.
Selector switch for choosing radio transmitter.
Switches for selecting speaker or headphone output.
Description of optional microphone-headset combination.
Operation of the true airspeed indicator.
Function and use of the carburetor air temperature gauge.
Recommended oil grades and capacity for the engine.
Specifies the engine oil sump capacity.
Procedures and intervals for oil and filter changes.
Approved fuel grades and tank capacities.
Tire pressures and nose gear strut servicing.