CESSNA SECTION 6
MODEL 162 EMERGENCY PROCEDURES
GARMIN G300
U.S.
PFD/MFD DISPLAY MALFUNCTION OR FAILURE
(Continued)
PFD OR MFD DISPLAY INFORMATION NOT UPDATING
1. Pull (open) the following circuit breakers:
a. ADAHRS Circuit Breaker - OPEN
b. PFD/MFD Circuit Breaker - OPEN
c. SEC PWR Circuit Breaker - OPEN (overhead panel light will
go off)
2. Reset (close) all three circuit breakers
a. ADAHRS Circuit Breaker - CLOSE
b. PFD/MFD Circuit Breaker - CLOSE
c. SEC PWR Circuit Breaker - CLOSE
3. Affected Display(s) - NOT UPDATING (use other display (if
installed).
a. Transponder - Select Pressure Altitude display using FUNC
button (ADAHRS may be providing altitude information to
transponder).
b. Navigate using pilotage and magnetic compass (if installed)
to nearest suitable landing site.
c. Land as soon as possible. Refer to LANDING WITH
PARTIAL OR NO INSTRUMENTATION INFORMATION
4. Affected Display - NORMAL SCREEN
a. Land as soon as practical.
162PHUS-01
6-25
To Next Page