CESSNA SECTION 8
MODEL 162 AIRPLANE HANDLING, SERVICE
GARMIN G300 AND MAINTENANCE
U.S.
CLEANING AND CARE (Continued)
INTERIOR CARE
To remove dust and loose dirt from the upholstery and interior, clean
the interior regularly with a vacuum cleaner.
Blot up any spilled liquid promptly with cleansing tissue or rags. Do not
pat the spot; press the blotting material firmly and hold it for several
seconds. Continue blotting until no more liquid is taken up. Scrape off
sticky materials with a dull knife, then spot clean the area.
Oily spots may be cleaned with household spot removers, used
sparingly. Before using any solvent, read the instructions on the
container and test it on an obscure place on the fabric to be cleaned.
Never saturate the fabric with a volatile solvent; it may damage the
padding and backing materials.
Soiled upholstery may be cleaned with foam type detergent, used
according to the manufacturer's instructions. To minimize wetting the
fabric, keep the foam as dry as possible and remove it with a vacuum
cleaner.
HARSH OR ABRASIVE SOAPS OR DETERGENTS
WHICH CAUSE CORROSION OR SCRATCHES SHOULD
NEVER BE USED ON THE PAINTED ALUMINUM
STRUCTURE.
For complete information related to interior cleaning, refer to the
Maintenance Manual.
AVIONICS CARE
The Garmin G300 and avionics displays have an anti-reflective coating
that is very sensitive to skin oils, waxes, ammonia, and abrasive
cleaners. Clean the displays as described in the G300 Pilot’s Guide.
162PHUS-01
8-25/8-26
To Next Page