Cessna T303 - 5-31. WINGS.; A. Electrical Power (Chapter 24).; B. Flight Controls (Chapter 27).

CESSNA
MODEL T303
MAINTENANCE
MANUAL
CESSNA
PROGRESSIVE
CARE
MODEL T303
OPERATION NO. 2
Cessna
DEALER INFORMATION
CUSTOMER
AND
AIRCRAFT
INFORMATION
ZONE
NAME
SERVICING
DEALER
NAME
ADDRESS
SERVICING
DEALER
CODE
CITY & STATE
A C MODEL
AND SERIAL NO
REG NO
DATE
ENG. SERIAL NO
ENG SERIAL NO
LEFT HAND R H
ZONE
CODE
SELLING
WARRANTY
DEALER
CODE
START
DATE
MECH INSP REMARKS
5-31. WINGS.
A. Electrical Power (Chapter 24).
* (1)
Battery Installation
- Inspect
overboard
vent and vent
line for
damage and obstruction.
* (2) Battery Cables
- Inspect for corrosion
and deterioration.
* (3)
Battery
Electrolyte
- Inspect
for spewage
and
level in
each
cell.
* (4)
Fuseholders -
Ensure all fuses
are functional
and spares
are
available.
(5) Wings and Fuselage
- Check wiring, routing,
security and
terminals.
(6)
External
Power -
Inspect receptacle
for securityof
installation
and damage.
Inspect contactors for damage
and operation.
B. Flight Controls
(Chapter
27).
(1) Ailerons - Inspect skins and hinges for cracks and loose
rivets;
bellcrank
stop bolt for
looseness
and/or jam
nut
for
being tight,
linkage,
pulleys and
bolts for condition,
operation,
security,
travel and
friction.
(2) Aileron
Trim
Tab - Inspect
skin
and hinge
for
cracks and
loose
rivets; linkage
for cracks
and wear,
bolts
for
safety
and
tab for
free play
and travel.
(3)
Aileron
Trim Tab
Actuator
- Check
for condition
and se-
curity.
(4)
Aileron
and Aileron
Trim
Cables -
Check condition,
rout-
ing, tension,
turnbuckle
safetying;
cables
in
pulleys
and
not rubbing structure.
(5)
Flaps
- Check
linkage,
bellcranks,
pulleys,
cables,
motor
and actuator
for condition,
tension
and
security.
(6)
Flaps
- Check
travel,
extension
and retraction.
*50-Hour
Requirement,
Refer
to Paragraph
5-22, B.
D5267-13
Page 1 of 6