DC112d/DC112
User’s manual
9
MEASUREMENT KEYS:
a) Key to begin or end a measurement
b) Key to continue a measurement (when the
DC112d/DC112 is on
)
a) Key to interrupt (PAUSE) a measurement
(while the DC112d/DC112 is on
or )
b) Or to begin a recording in the memory (when
the DC112d/DC112 is on
)
Key to return to the previous octave band
Key to move on to the next octave band, or to move
on to the numerical screen with projected parameters.
Key to select the desired Dosimeter mode screen:
numerical screen, 1/1 spectrum analyser screen or
graphic screen
Key to block the keypad. To unblock it press this same
key + OK.
To Next Page
Loading...