CESVA DC112 - 4 Data Transfer; Transfer of Data to a PC: Communication Software

To Next Page

To Previous Page

4. DATA TRANSFER

The DC112d/DC112 has the following data outputs (see figure).

• USB communications port

: bidirectional digital USB 1.1 full speed port for communication

with a personal computer

The USB communication port allows real time transmission of the functions measured and

those saved in the memory of a computer with a high transfer speed

4.1 Transfer of data to a PC: Communication software

The communication software supplied with the DC112d/DC112 ( Capture

Studio), allows the following operations to be carried out:

• Real time transmission of the data measured by the DC112d/DC112 to a computer.

• Downloading the registers saved by the DC112d/DC112.

• Register management (erasing, etc.).

• Programming the dosimeter (time, parameters, etc.).

To carry out these functions the DC112d/DC112 must be connected to the USB port of a

computer with the cable supplied.

For more information about

Capture Studio, use the help that it incorporates.