CESVA DC112 - Settings; Switching the Dc112 D;Dc112 off

22
2.5.4 Settings
• SETTINGS:
This option enables you to set a number of features of the DC112d/DC112, eg. Time/date
adjustments, language or sensitivity of the DC112d/DC112.
 SETTINGS Î MEASURING
With this option the acoustic parameters for the evaluation of noise at work: level
of criterion L
C,
projection time t
p
and integration time T are defined (see 2.3.1).
 SETTINGS Î MEASURING (only DC112)
• DOSIMETER.
With this option the acoustic parameters for the evaluation of noise at work are
defined; criterion level L
C,
projection time t
p
and integration time T (see 2.3.1).
• SPECTRUM ANALYSER.
Allows to select the frequency weighting (A or without) which will be used for the
spectrum analyser(see 2.3.1).
 SETTINGS Î SENSITIVITY ADJUST:
This option enables you to adjust the sensitivity of the DC112d/DC112. For more
information see section
2.2.3 Testing the DC112d/DC112.
 SETTINGS Î LANGUAGE
Allows the language to be selected in which all the messages and menus of the
DC112d/DC112 are displayed. Select the language with
and .
 SETTINGS Î TIME AND DATE
This option allows the time and date of the DC112d/DC112 to be adjusted.
2.6 Switching the DC112d/DC112 off
To switch off the DC112d/DC112, check that no measurement is in progress ( ) and
press:
.